Behringer K450FX PA and Keyboard Amp

The super-compact, self-contained Behringer K450FX is perfect for public address systems, keyboards, voice, or various drum/backing machines. 45W of power are handled confidently by a headroom-rich 10" Bugera speaker, making sure that you can faithfully reproduce a broad repertoire of signals. Behringer includes features usually found in much larger amps: 24-bit digital FX with 100 hot presets; FBQ Feedback Detection System; 5-band EQ section; CD input; headphone output; and full 3-channel operation with separate volume controls and FX sends per each channel plus an additional XLR mic input for connecting dynamic microphones.

Drive K150 150W 1x12 4-Channel Keyboard Amplifier

Plenty of power to give you great stage volume for your keyboard and just loud enough to be used as a mini-PA. It features 150W power, 4 channels, one 12" Eminence speaker, a tweeter, and an XLR mic jack on channel one with phantom power on/off switch. Channels 1, 2, and 3 have their own volume controls with left and right input jacks. Channel 4 has volume control, left and right jacks, aux left and right jacks, and a 6- or 8-channel mix selector. There is also a headphone jack, 7-band graphic EQ, a line out with volume control and mute button, main level control with mute button. External right amp source and return jacks, an 8-channel expander jack, and stereo channel line out.

Roland KC-60 Keyboard Amplifier

With the Roland KC-60 Keyboard Amplifier, you get a whole lot of flexibility for your dollar in this scaled-down model that retains that sought-after KC sound. The amp's 40W power section drives a 10" speaker through 3 separate channels that include 1/4" line, XLR mic, and aux inputs so you can easily add vocals and backing from other sources. Rotary controls adjust channel and headphone outputs plus low and hi EQ. Also, the Roland KC-60 subwoofer output offers big bottom-end potential.

Yorkville 100KW 12" 2-Channel Wedge Keyboard Amp

2-channel operation with channel 1 optimized for microphones with an XLR and a 1/4" input, and channel 2 optimized for line level and keyboard sources with 2 phone and 2 RCA inputs. 100W of power. 12" woofer and an RCF N252P tweeter. Effects send and return. Wedge-shaped cabinet made of 7-ply poplar plywood with internal bracing. Black carpet exterior with plastic corners.

Peavey KB 1 20W 1x8 2-Channel Keyboard Amp

Perfect for keyboards, drum machines, backing machines, or as a PA. 20W drive an 8" extended-range speaker. 2 separate channels with a 2-band EQ per channel and a headphone out.

Traynor K4 Keyboard Amp

The K4 amplifier is an advanced, extremely versatile stereo keyboard amp that delivers a wide spectrum of tones. More importantly, it has the ability to sound right with a minimum amount of tweaking.The Traynor K4 consists of three separate, built-in amplifiers, for true stereo operation with a mono-summed woofer. A 200-watt Low Frequency amplifier drives a 12-inch, 200-watt woofer, while a pair of 50 watt amps drive the left and right channels, delivering the mid and high frequencies through a set of 4.5-inch, 30-watt midrange drivers and a pair of 20-watt 2.5-inch compression drivers with horns.One unique feature of the K4 amp is how Channel 1 utilizes a pair of 12AX7 tubes, one for each channel, left and right. These preamp tubes supply warmth and smooth out the harsh harmonic overtones often associated with many modern Digital keyboards. It also excels at maintaining the warmth and character of vintage synthesizers and organs where it isn t always practical to use the much larger powered speaker cabinets they are typically associated with.There is also a select switch to toggle between using either the tube or a Solid-State signal path, bypassing the tube on the input altogether, for those times when the cleanest signal path possible is preferred. Channel one also features a foot switchable Tube Overdrive control, for those who like to add a small amount of grit to their playing. Depending on the level, a small amount of warmth right up to full grit can be had from the Tube Overdrive. Natural tube compression is a very desired tone as the subtle dynamics can't be properly emulated by most of today s digital workstations. Use this feature to add some grit to an otherwise sterile keyboard tone to make it a truly vintage, tube-based one. A single button latching footswitch, like the AFS-1 can be used to engage the Lead/Overdrive feature. If a footswitch is connected, it will disable the front panel switch. Additional tonal control can be had thanks to the three band EQ and 5 position (Bypass, Studio, Live, Piano, Organ) selectable voicing presets.Like Channel One, Channel Two also features its own Gain control as well as a 3 band EQ. Available inputs include a stereo pair of balanced 1/4-inch TRS inputs and a single XLR, for mono only operation.Channel Three uses an independent Gain control to set the levels for the stereo pair of balanced 1/4-inch TRS inputs and stereo pair of RCA inputs. All three channels feature their own input clip LED s for simple monitoring of input levels from the darkest of stages and a single Master Volume and Power Switch let you be heard when you want to.Channel 4 inputs and Gain control can be found on the rear panel. The possibilities are endless with it. Use it to bring in an external click track or drum monitor mix, or get a microphone feed from the FOH or monitor console. The two inputs can even be used for monitoring two different sources if desired. The signal goes directly into the power amplifier, so it bypa

Crate KXB50 50W Keyboard Amp

The ultimate in keyboard amplification in powerful, great sounding packages, KXB Series amps feature multichannel inputs, high-quality woofer and tweeters. Versatile traditional, vertical, or monitor positioning options. Ozite covering and steel grille with foam insert behind the grille.The compact 50W amp with a 12" woofer and piezo tweeter features 2 - 1/4" inputs, each with their own level control so you can mix your keyboard with another instrument or a Hi-Z vocal mic. Also features a CD input so you can play along with your favorite music, an insert jack to connect external effects (doubles as a line out jack to send a signal to a recorder, mixing board, or house PA), a headphone jack for quiet practice, and an external speaker jack to connect to another speaker cab. Internal limiter prevents overdriving the output signal with an LED that lights when the limiter is activated. The KXB50 also has a peak LED to indicate clipping. A master volume control plus 4-band EQ and reverb fine-tune your sound to perfection.

Roland KCW-1 200W Keyboard Subwoofer

A convenient way to add 200 watts of punchy low end to sub-out equipped KC amps, or to standard amplifiers via the stereo Thru output with 1/4" and XLR jacks. Very tight sound is never muddy. Intuitive controls include crossover knob, phase switch, and shape switch. 10" heavy-magnet speaker.

Roland KC-350 120W Keyboard Mixing Amp

The Roland KC-350 120W Keyboard Mixing Amp is ideal for medium-sized gigs. With a 120W amp, 12" speaker and horn tweeter, 4-channel operation, 3-band EQ, XLR mic input, output select switch, and shape switch for quick tonal adjustment. Connectivity includes an XLR line out for connecting to mixing consoles, a 1/4" out for connecting to recording devices, a subwoofer output compatible with Roland's KCW-1, and a stereo link in/out for chaining 2 KC-350s for stereo performance.

Drive K30 30 Watt 1x10 2-Channel Keyboard Amplifier

A little extra loudness makes the Drive K30 30 Watt 1x10 2-Channel Keyboard Amplifier great for low-volume band rehersals and personal practice. The Drive K30 keyboard amp's 3-band EQ and a separate input and volume control for each channel give you some flexibility.

Behringer ULTRATONE K1800FX 180W PA System and Keyboard Amp

With 180 watts of power, you'll never run out of horsepower. The Behringer K1800FX is a 4-channel PA/keyboard amplifier enclosed in a bass reflex cabinet. It has a special beefed up 12" Bugera woofer and a custom-made 1" tweeter, delivering clear, clean sound that's ideal for larger gigs. It includes an internal 24-bit digital FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects. The FBQ Feedback Detection System immediately indicates any frequency that is feeding back so you know precisely what to adjust. Enjoy full 4-channel stereo operation with separate volume and FX Send controls per channel, plus there is an additional XLR mic input on channel 1 for direct connection of a dynamic microphone. Use the dedicated 7-band graphic EQ to give your sound your very own edge.

Behringer Ultratone KT108 15w Keyboard Amplifier

The Behringer Ultratone KT108 is a super-compact 2-channel, 15-Watt keyboard amp. It's perfect for keyboards, vocals, drum machines, or wherever a small sound system is needed. Behringer's VTC Virtual Tube Circuitry lends the KT108 tube-like sound, and a separate headphone output is provided for those times when you need to keep it quiet. Use it as a practice amp and play with accompaniment via the CD input or take it with you whenever small size is crucial. Its powerful 20W dual-cone 8" speaker provides a wide frequency response appropriate for an amp with such a variety of possible applications. Included is a dedicated 3-band EQ for the ultimate in no-frills sound shaping.

Kustom KMA65X Keyboard/Mixer Amplifier

It has 3 channels, 65W of power, a 12" Celestion speaker, 4-band active EQ, 8 preset digital effects, and a loop for outside effects. The XLR input has phantom power. Footswitch jack and output for extension speaker.